Clark, Donald S.

Advisor — 15 thesises

• Baer, Oliver A. — A Comparison of Microplastic Strain Produced Statically and Dynamically (1948, Engineer's thesis)
• Vreeland, Thad — A Study of the Initiation of Yielding in Mild Steel (1952, Dissertation (Ph.D.))
• Wetmore, William Owen — An Investigation of Some Silver Alloy Steels (1941, Dissertation (Ph.D.))
• King, Kenneth Robert — Dynamic Shear Deformation in Zinc Crystals (1962, Dissertation (Ph.D.))
• Elmer, David Arthur — Influence of Low Temperature on the Tensile Impact Properties of Two Shipbuilding Steels (1948, Engineer's thesis)
• Thatcher, Roland Churchill — Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns (1952, Engineer's thesis)
• Paul, Charles Craig — The Design of a Multipurpose Chair for Children (1948, Engineer's thesis)
• Johnson, James Edgar — The Dynamic Stress-Strain Relation of Annealed 2S Aluminum Under Compression Impact (1953, Dissertation (Ph.D.))
• Russell, Thomas Lee — The Effect of Grain Size on the Yielding Behavior of Very Low Carbon Steel. (1958, Dissertation (Ph.D.))
• Hardy, Donald James — The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit (1949, Engineer's thesis)
• Ringness, William Merritt — The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit (1949, Engineer's thesis)
• Wood, David Shotwell — The Influence of Stress and Temperature upon the Time to Initiate Plastic Deformation in an Annealed Low Carbon Steel (1949, Dissertation (Ph.D.))
• Griffis, LeVan — The Influence of the Rate of Deformation on the Strength of Materials in Tension (1941, Dissertation (Ph.D.))
• McMaster, Robert Charles — The Non-Destructive Testing Spotwelds in Alclad Aluminum Alloy Sheets (1944, Dissertation (Ph.D.))
• Freeman, Robert Braman — The Relative Sliding Wear Resistance of Some Hard Alloys (1936, Dissertation (Ph.D.))