Engineer's thesis — 1947

• Anderson, Roy Gene; Rush, Charles Wesley; McClellan, Thomas Rufus — Development of a Hydroduct
• Bowie, James Monfort; Huestis, Gerald Stephen — Gas Generation by Chemical Reaction for Pressurizing Liquid Rocket Propellants
• Bull, Edward George; Mastin, Robert L. — Repeated Loads Above the Proportional Limit on 24ST Aluminum Alloy
• Burger, Glenn William; Daniels, Jerry Forest — Design of an Instrument for Measuring the True Vertical Velocity of an Airplane at Moment of Contact in Landing
• Clarke, Fredric B.; Sappington, Merrill Homer — A Study of the Ignition Lag of Spontaneous Rocket Propellants
• Cole, Charles Willard; Levitt, Bernard Barclay — Design of an Instrument for Measuring the True Vertical Velocity of an Airplane at Moment of Contact in Landing
• Cole, Julian David — On the Transonic Flow Past Thin Airfoils
• Collins, Hugh L. H. — Experimental Study of the Burning Rates of Some Solid Propellants by Using a Closed Bomb
• Deodati, Joseph Benjamin; Monteath, Edward Berlendis — An Investigation of the Round Jet in a Moving Air Sstream
• Dore, Frank John — The Design of Tailless Airplanes
• Durup, Paul Christian; Weisenberg, Joseph Oscar — Lateral Stability of Thin Tapered Struts
• Fossier, Mike Walter; Small, John — Supersonic Wind Tunnel Tests of Two Rocket Propelled Projectile Models
• Goodwin, Walter Hardenbroecke — Formation and Propagation of Fatigue Cracks in Metals as Affected by Overstressing and Understressing
• Griffing, Charles W.; Wilburn, William Clarence; Purdon, David; McLaughlin, Earl Wilson — An Application of the Method of Characteristics to Axially Symmetric Supersonic Flow
• Heppe, R. Richard — Investigation of a Variable Geometry Supersonic Diffuser
• Kirkwood, Thomas Frederick — Integral Methods Applied to a Compressible Boundary Layer on an Insulated Flat Plate Parallel to the Wind
• Li, Ting-Yi — Lift on Two-Dimensional Symmetrical Airfoil of Finite Thickness in Supersonic Flow
• Marble, Frank Earl — The Rotational Motion of an Ideal Fluid and Application to the Three-Dimensional Flow Through Axial Turbomachinery
• Mullane, Leo Wayne — An Apparatus for the Study of the Turbulent Diffusion Flame
• O'Meara, Donald John; Andrews, Clyde Cecil — A Study of the Temperature Gradients of Gases Flowing Through Heated Porous Metal
• Palmer, George Marshall — The Downwash Distribution Behind a Delta Wing at Supersonic Speeds
• Pollock, Albert David; Reck, Floyd Francis — A Study of Methods to Increase the Lift of Supersonic Airfoils at Low Speeds
• Ponsford, Henry Thomas — A Study of Some Problems Affecting the Design of Wings for Transonic Aircraft
• Reiserer, Russell Lawrence; Barden, Kenneth Perrin — Design and Test of a Rocket Motor Expansion Joint
• Rice, Harold Egbert — Performance Calculations of New Propellant Systems
• Sanders, Lewis B. — An Investigation of Inspection Criteria for Countersunk Rivets
• Satterfield, Loys Malcolm; Wheatley, John Paul — Theoretical Investigation of Acceleration of a Turbojet Engine
• Soli, Orlan Alton; Ditch, William Earl — A Study of the Effects of Rapidly Applied Loads and Repeated Loads on Countersunk Riveted Joints
• Tangren, Robert Fulton — Correction of Ramjet Experimental Data
• Thompson, Russell Albert, Jr. — Phase Behavior of Propane and Propene Hydrates
• Trilling, Leon — A Problem in Potential Flow with a Free Surface
• Weldon, Thomas Franklin — The Performance of a Supersonic Airplane