Engineer's thesis — 1963

• Blackiston, Harry Spencer — Tip Effects on Fluctuating Lift and Drag Forces Acting on a Circular Cylinder Perpendicular to an Air Flow
• Githinji, Philip Mwangi — Effect of Orientation of a Flat Heating Surface on Nucleate Boiling Heat Transfer
• Liñán-Martínez, Amable — On the Structure of Laminar Diffusion Flames
• Mauldin, James Howard — Part I. Analysis of a Multi-Stage Axial Compressor with High Reaction Blading. Part II. A Design Study of a Multi-Stage Axial Compressor with Blading of High Aspect Ratio
• Parks, Richard Earl — An Analysis of Turbulent Flame Spreading in a Rectangular Duct
• Roesch, Louis C. — The Influence of Temperature and Preferred Orientation on Hall Coefficient and Resistivity of Pure Titanium
• Rupert, Viviane Claude — Influence of Radiative Dissipation on the Shock Wave Structure
• Slachmuylders, Erik Jaak — Measurements of the Acceleration of Reflected Shock Waves by Means of a New Heat Transfer Gauge
• Stebbins, Charles Fleming — Measurements of Heat Transfer Rates Within a Plane Shock Wave Using Very Fine Cold Wires
• Stuart, Floyd Ronald — The Buckling of Thin Walled Circular Cylindrical Shells Under Combined Axial Compression and Bending
• Tesnière, André Jacques — Analysis of Heterogeneous Reactors Containing Moderating Fuel Elements
• Thompson, Thomas Ross — The Gray Gas in Hypersonic Flow
• Wrobel, Joseph Richard — Application of the Element Potential Method to Gaseous Chemical Equilibrium Calculation