Sechler, Ernest Edwin

Advisor — 99 thesises

• Lee, Edwin Samuel; Sterling, Cedric Warren — A Correlation of Repeated Tension Impact Tests with Other Tension Tests of 17ST Duralumin (1943, Engineer's thesis)
• Brown, John R. — A Critical Study of Spin-Up Drag Loads on Aircraft Landing Gears (1949, Engineer's thesis)
• Bell, Willard Newton; Bussey, John Kenneth — A Photoelastic Investigation of the Distribution of Shearing Stresses in a Stiffened Flat Panel (1938, Master's thesis)
• Tyra, Thomas Donald; Hollister, William Wallace — A Photoelastic Investigation of the Effect of Cutouts in Panels Subject to Shear and Bending (1941, Engineer's thesis)
• Hanger, Willard Muirhead — A Photoelastic Investigation of the Effect of Elliptical and Modified Cutouts in Flat Panels Subjected to Combined Bending and Shear (1943, Engineer's thesis)
• Gibbons, Robert Martin; Dill, Douglas Gordon — A Photoelastic Investigation of the Effect of Elliptical and Modified Cutouts in Flat Panels Subjected to Combined Bending and Shear (1942, Engineer's thesis)
• Magden, John Leslie — A Preliminary Investigation of Rivets and Riveted Joints in Metal Airplane Construction (1934, Master's thesis)
• Fan, Hsu-Tsi — A Study of "Shear Lag" Phenomenon in a Stiffened Flat Panel by Photoelastic Methods (1939, Master's thesis)
• Stalk, George — A Study of Fatigue Notch Sensitivity of 2014-T and 7075-T at Elevated Temperatures (1955, Engineer's thesis)
• Beardsley, George Francis; Coates, Leonidas Dixon — A Study of the Effect of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction (1939, Master's thesis)
• Gentner, William Ellis; Biglow, James Otis — A Study of the Effect of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction (1940, Master's thesis)
• Soli, Orlan Alton; Ditch, William Earl — A Study of the Effects of Rapidly Applied Loads and Repeated Loads on Countersunk Riveted Joints (1947, Engineer's thesis)
• Olsen, Carl Baker; Brown, Sheldon Willis — A Study of the Effects of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction (1942, Engineer's thesis)
• Moore, Charles Kenneth; Nollan, John Lloyd — Age Hardening of Heat Treated Aluminum Alloy. An Investigation of the Fluctuation of Hardness with Time of Ageing of Heat Treated Aluminum Alloy Sheet (1937, Master's thesis)
• Bremmer, David Franklin — An Efficient Approximate Solution Method for Predicting the Buckling of Axially Compressed Imperfect Cylindrical Shells (1975, Engineer's thesis)
• Mechling, Wallace Bristol; Jack, Samuel Sloan — An Evaluation of the Tension Impact Test by Correlation With the Physical Properties of Aluminum Alloys (1938, Master's thesis)
• Hege, Jeremiah Collins; Goebel, Thomas Parker — An Experimental Investigation of the Effect of Lip on the Column Strength of Rolled Sheet Zee and Angle Sections (1945, Master's thesis)
• McCoy, John Carver — An Experimental Investigation of the General Instability of Ring-Stiffened, Unpressurized, Thin-Walled Cylinders Under Axial Compression (1958, Engineer's thesis)
• Dunn, Louis Gerhardus — An Experimental Investigation of the Stresses in Extruded Sections Commonly Used in Aircraft Construction (1938, Master's thesis)
• Kauffman, Ralph J. — An Investigation of Creep in Light Metal Alloys (1952, Engineer's thesis)
• Sanders, Lewis B. — An Investigation of Inspection Criteria for Countersunk Rivets (1947, Engineer's thesis)
• Dunn, Louis Gerhardus — An Investigation of Sheet-Stiffener Panels Subjected to Compression Loads with Particular Reference to Torsionally Weak Stiffeners (1940, Dissertation (Ph.D.))
• Goebel, Thomas Parker — An Investigation of the Deformation of a 3S-O Sheet Specimen During Tensile Failure (1949, Engineer's thesis)
• Ours, Statton Ray; Jackson, William Gauss — An Investigation of the Effects of Weight Geometry and Time in Repeated Tension Impact Testing (1944, Engineer's thesis)
• Gilkeson, Fillmore Bolling — An Investigation of the Stresses and Deflections of Swept Plates (1949, Engineer's thesis)
• Kulkarni, Arun Narayan — Analysis of the Airline Systems Performance by Varying Inputs, Viz. Jet Aircraft, Routes and Scheduling (1972, Engineer's thesis)
• Lee, Jen-shih — Application of Finite Elastic Theory to the Deformation of Cylindrical Tubes (1966, Dissertation (Ph.D.))
• Kanemitsu, Sunao; Nojima, Noble M. — Axial Compression Test of Thin Circular Cylinders. A. Length Effect. B. Visual Study of Buckling (1939, Master's thesis)
• Peck, Jerry Clifford — Bending-Torsion Flutter of an Airfoil with Nonlinear Structural Characteristics (1959, Engineer's thesis)
• Fersht, Rena Scher — Buckling of Cylindrical Shells with Random Imperfections (1968, Dissertation (Ph.D.))
• Majumdar, Suarindranath — Buckling of Thin Annular Plates Due to Radial Compressive Loading (1968, Engineer's thesis)
• Matzdorff, Roger Edward — Castable Plastics in Photoelastics Stress Analysis (1950, Engineer's thesis)
• Gaibler, Richard — Column Creep of 75S-T6 Aluminum Alloy (1952, Engineer's thesis)
• Ogilvie, Douglas Clark — Correlation of Existing Design Information on Sandwich Construction (1949, Engineer's thesis)
• Kane, John Clarence — Correlation of Fatigue Data to Determine Stress Concentration Factors in 76s-T Aluminum Alloys (1950, Engineer's thesis)
• Shepherd, John Tyler — Correlation of Fatigue Data to Determine Stress Concentration Factors in 76S-T Aluminum Alloys (1950, Engineer's thesis)
• Reiserer, Russell Lawrence; Barden, Kenneth Perrin — Design and Test of a Rocket Motor Expansion Joint (1947, Engineer's thesis)
• Davis, Thomas V. — Design of a Large Water Tunnel (1948, Engineer's thesis)
• Ford, Warren Woodrow — Design of a Six Component Internal Strain Gage Balance System (1949, Engineer's thesis)
• Burger, Glenn William; Daniels, Jerry Forest — Design of an Instrument for Measuring the True Vertical Velocity of an Airplane at Moment of Contact in Landing (1947, Engineer's thesis)
• Howland, Walter Lavern — Effect of Rivet Spacing on Stiffened Thin Sheet Under Compression (1936, Master's thesis)
• Martin, Harold Clifford — Elastic Instability of Cantilever Struts Under Combined Axial and Transverse Forces at the Free End (1950, Dissertation (Ph.D.))
• Fung, Yuan-cheng — Elastostatic and Aereolastic Problems Relating to Thin Wings of High Speed Airplanes (1948, Dissertation (Ph.D.))
• Garrett, Joseph — Experimental Deflection Survey of Cantilever Sectors of Uniform Thickness (1949, Engineer's thesis)
• Henry, William Earl — Experimental Deflection Survey of Cantilever Sectors of Uniform Thickness (1949, Engineer's thesis)
• Putt, Donald Leander — Experimental Investigation of the Thickness of the Boundary Layer and the Location of the Transitional Region Along a Wing Section (1938, Master's thesis)
• Nagamatsu, Henry Takeshi — Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression (1940, Master's thesis)
• Tsubota, George Yoshio — Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression (1939, Master's thesis)
• Butterworth, Wesley Theodore — Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression (1938, Master's thesis)
• Berry, John Warren — Fatigue of Aluminum as Affected by Temperature and Intermittent Periods of Rest (1956, Engineer's thesis)
• Lamb, William Emerson — Fatigue Strength of Metal Sandwich Type Construction (1949, Engineer's thesis)
• Dervishyan, Aram Ohannes — Fatigue Stress Concentration Studies on Aluminum Alloys (1952, Engineer's thesis)
• Fourney, Michael Eugene — I. On the Application of a Laser to High Speed Photography. II. Torsional Magnetoelastic Waves in a Circular Cylinder (1963, Dissertation (Ph.D.))
• Dixon, Howard Henry — Investigation of Design Criteria of Stiffened Wood Curved Panels (1944, Engineer's thesis)
• Sweeney, William Edward; Bridgland, Edgar Parsons — Investigation of Design Criteria of Stiffened Wooden Panels (1943, Engineer's thesis)
• Parr, Warren Sherman; Beakley, Wallace Morris — Investigation of Duralumin Channel Section Strut Under Compression (1935, Master's thesis)
• Smith, Joe Nelson; Murphy, Joseph Nathaniel — Investigation of Extended Bulb Angle Sections Under Compression: Part One. As Euler Columns ; Part Two. As Stiffeners Attached to Sheet (1937, Master's thesis)
• Kitsuda, Kaname — Investigation of Stress Distribution on Thin Metal Sheet With Holes (1935, Master's thesis)
• Tyson, Thomas Janney — Laminar Boundary Layers in the Neighborhood of Abrupt Spatial Disturbances (1967, Dissertation (Ph.D.))
• Durup, Paul Christian; Weisenberg, Joseph Oscar — Lateral Stability of Thin Tapered Struts (1947, Engineer's thesis)
• Lurie, Harold — Lateral Vibrations as Related to Structural Stability (1950, Dissertation (Ph.D.))
• Tong, Pin — Liquid Sloshing in an Elastic Container (1966, Dissertation (Ph.D.))
• Williams, Max L. — Maximum Stress in a Cylindrical Bar of Double Wedge Cross Section Under Torsion (1948, Engineer's thesis)
• Evensen, David Arthur — Non-Linear Flexural Vibrations of Thin Circular Rings (1964, Dissertation (Ph.D.))
• Chase, Robert Apperson — Pressurized Fuselage Stress Analysis (1955, Dissertation (Ph.D.))
• Nelson, Conrad Nathaniel — Repeated Loads Above the Proportional Limit on 24-ST Aluminum Alloy (1948, Engineer's thesis)
• Joga Rao, Chintakindi Venkata — Repeated Loads Above the Proportional Limit on 24st Aluminum Alloy (1948, Engineer's thesis)
• Bull, Edward George; Mastin, Robert L. — Repeated Loads Above the Proportional Limit on 24ST Aluminum Alloy (1947, Engineer's thesis)
• Cooley, James Siggins — Reversed Bending Fatigue Properties of 25 S-T, 75 S-T, and 76 S-T Aluminum Alloys (1949, Engineer's thesis)
• Wojcik, Gregory Lynn — Self-Similar Elastodynamic Solutions for the Plane Wedge (1977, Dissertation (Ph.D.))
• Mellinger, George Rolland; Kurihara, Hisayuki — Shear Transfer of Load From Main Beams to Intermediate Corrugations in Metal Sheet Covered Box Beams (1938, Master's thesis)
• Thatcher, Roland Churchill — Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns (1952, Engineer's thesis)
• Valluri, Sitaram Rao — Some Studies in the Fundamental Parameters of Fatigue (1954, Dissertation (Ph.D.))
• Kleiss, Norman Jack; Kerkering, Stanley William — Some Studies of Expansion Rings in Rocket Motors (1946, Engineer's thesis)
• Hegemier, Gilbert Arthur — Stability of Thin Cylindrical Shells Subjected to a Class of Axially Symmetric Moving Loads (1964, Dissertation (Ph.D.))
• Howland, Walter Lavern — Strength of Thin-Walled Elliptical Cylinders Supported at the Minor Axis (1939, Dissertation (Ph.D.))
• Solverson, Robert Richard — Stress Concentrations in Fillets (1953, Dissertation (Ph.D.))
• Teig, Vernon Ellwood — Stress Distribution in Two Intersecting Cylinders Under Pressure (1949, Engineer's thesis)
• Harmon, Leonard Edward — Stress, Distribution in Two Circular Cylinders Intersecting at Right Angles Under the Influence of Internal Pressure (1949, Engineer's thesis)
• Allardt, Frederick Hamilton — The Brinelling of Small Ball Bearings (1937, Master's thesis)
• Parmerter, Robert Reid — The Buckling of Clamped Shallow Spherical Shells Under Uniform Pressure (1964, Dissertation (Ph.D.))
• Babcock, Charles Dwight — The Buckling of Cylindrical Shells with an Initial Imperfection Under Axial Compression Loading (1962, Dissertation (Ph.D.))
• Stuart, Floyd Ronald — The Buckling of Thin Walled Circular Cylindrical Shells Under Combined Axial Compression and Bending (1963, Engineer's thesis)
• Starnes, James Herbert, Jr. — The Effect of a Circular Hole on the Buckling of Cylindrical Shells (1970, Dissertation (Ph.D.))
• James, George Thomas — The Effect of Adhesive Coating on the Fatigue Properties of 2014-T and 7075-T at Normal and Elevated Temperatures (1955, Engineer's thesis)
• Sullivan, Timothy Lay — The Effect of Floating Rings on the Stability of Longitudinally Stiffened Cylinders in Axial Compression (1961, Engineer's thesis)
• Arbocz, Johann — The Effect of General Imperfections on the Buckling of Cylindrical SheIls. (1968, Dissertation (Ph.D.))
• Hardy, Donald James — The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit (1949, Engineer's thesis)
• Ringness, William Merritt — The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit (1949, Engineer's thesis)
• Robinson, Winthrop Pratt — The Effect of Temperature Ccycling on the Physical Properties of 75S-T6 Aluminum Alloy Sheet Metal (1953, Engineer's thesis)
• Lindsley, Jack Nathan — The Effect of Temperature Cycling on the Physical Properties of FS-1 Magnesium Alloy Sheet Metal (1953, Engineer's thesis)
• Toda, Susumu — The Effects of Elliptic and Rectangular Cutouts on the Buckling of Cylindrical Shells Loaded by Axial Compression (1975, Engineer's thesis)
• Ponsford, Henry Thomas — The Effects of Stiffness on the Buckling of Cylinders with Moderate Wall Thickness (1953, Dissertation (Ph.D.))
• Bell, Richard William — The Elastic Instability of Thin Cantilever Struts on Elastic Supports with Axial and Transverse Loads at the Free End (1958, Dissertation (Ph.D.))
• Berler, Irving — The Elastic Properties of 17ST Aluminum Alloy Tubing Including the Effects of Prestressing (1938, Master's thesis)
• Gloria, Ruben M. — The Failure of Pressurized Thin-Walled Cylinders (1957, Engineer's thesis)
• Fredrick, Joseph Louis — The Failure of Thin-Walled Semi-Elliptical Cylinders Under Torsion (1940, Master's thesis)
• Williams, Max Lea — The Plate Problem for a Cantilever Sector of Uniform Thickness (1950, Dissertation (Ph.D.))
• Lovett, Benjamin Barnes Compton; Rodee, Walter Fred — Transfer of Stress from Main Beams to Intermediate Stiffeners in Metal Sheet Covered Box Beams (1936, Master's thesis)