Engineer's thesis — 1948

• Altseimer, John H. — An Experimental Investigation of Detached Shock Waves
• Amster, Warren — An Investigation into the Effects of Running Propellers on the Static Longitudinal Stability of Multi-Engine Tractor-Propeller-Driven Monoplanes
• Auerbach, Charles Edward — Isobaric Heat Capacity at Bubble Point of Four Hydrocarbons
• Baer, Oliver A. — A Comparison of Microplastic Strain Produced Statically and Dynamically
• Bond, Robert Elston — The Design of a Door Latch and Handle for Application to Interior Residential Doors
• Brinkman, Robert Philip — Design of a Multipurpose Polishing Machine for Domestic Applications
• Buhler, Rolf Dietrich — Supersonic Flow Through Cascades, with Application to Diffusers
• Chuan, Raymond Lu-Po — An Investigation of Vortex Shedding as Related to the Self-Excited Torsional Oscillation of an Airfoil
• Davis, Thomas V. — Design of a Large Water Tunnel
• DeGroff, Harold M. — Calculation of the Optimum Pitch Distribution of a Propeller with Sweepback
• Eisenberg, Phillip — An Asymptotic Solution for the Flow About an Ellipsoid Near a Plane Wall
• Elmer, David Arthur — Influence of Low Temperature on the Tensile Impact Properties of Two Shipbuilding Steels
• Farrington, Paul Stephen — Volumetric Behavior of Propene and Three Mixtures of Propene and l-Butene
• Ford, Harold Harrison — The Design of a Portable Floor Lamp
• Gasich, Welko Elton — Downwash Distribution Behind a Wing with an Angle of Attack Discontinuity at Supersonic Speeds
• Glanville, James William — Volumetric Behavior of Benzene, Propane and Four Mixtures of these Substances
• Hsu, Chi-Nan — Calibration of Piezo-Electric and Electro-Magnetic Engine Indicators
• Imster, Harry Frederick; Lesko, James Steven — Axially Symmetric Laminar Compressible Boundary Layers with Pressure Gradient
• Jensen, Arnold Axtell; Koerner, Warren Gottlieb — Wind Tunnel Investigation of a Supersonic Tailless Airplane at Low Subsonic Speed
• Joga Rao, Chintakindi Venkata — Repeated Loads Above the Proportional Limit on 24st Aluminum Alloy
• Lampert, Seymour — Rolling Moment Due to Yaw of Flat Wings of Trapezoidal Planform at Supersonic Speeds
• Magnus, Richard Jeffrey — Study of Vortex Shedding as Related to Torsional Oscillations of a Thin Airfoil
• Marschner, Bernard Walter — An Investigation of Detached Shock Waves
• McNeal, Robert Francis — Design of a Gas Fired Space Heater
• Miller, Herman — Investigation of Errors Obtained with Reflection-Plane Mounted Models Due to End Plate Tares
• Murphy, Walter Patrick — Performance Calculations of Rocket Tripropellant Systems
• Nelson, Conrad Nathaniel — Repeated Loads Above the Proportional Limit on 24-ST Aluminum Alloy
• Paul, Charles Craig — The Design of a Multipurpose Chair for Children
• Pritchard, Ernest I. — Upwash and Sidewash Induced by Certain Control Surfaces in a Supersonic Flow
• Seager, Donald Barstow — Operational Flight Testing
• Sims, William Edward — Performance Calculations of Rocket Tripropellant Systems
• Slater, Mervin Otis — Calculation of Enthalpy-Entropy Diagrams for Rocket Propellant Systems
• Smith, Josiah E. — Investigations of the Aerodynamic Interactions Between Wind Tunnel Models and their Support Systems at the GALCIT Ten Foot Wind Tunnel
• Srinivasan, Natesan — Higher Order Approximations for Transonic Flow Over Slender Bodies
• Swan, Walter Charles — The Influence of Nozzle Design on the Flight Performance of Rocket Vehicles, with an Analysis of the Results of Jet Separation
• Wheldon, Wilbert Gayton — Method for Estimating Downwash Behind Swept Airfoils
• White, Richard Street — Calculation of Enthalpy-Entropy Diagrams for Rocket Propellant Systems
• Williams, Max L. — Maximum Stress in a Cylindrical Bar of Double Wedge Cross Section Under Torsion
• Wunch, William Stuart — Studies of the Double-Wedge and Biconvex Airfoils in Hypersonic Flow